1. Unpack the unit carefully. Avoid using sharp tools or blades, as they can damage the surface of the blanket.

2. Setup: Spread the blanket on the massage table and secure it to the corners using the straps. Ensure the power cable is not kinked or bent.

3. Operation: Connect the control unit to the power supply and switch it on. An indicator light will signal that it is working.

4. Temperature: Select the desired heat level (Low, Medium, High) based on the specific treatment.

5. Hygiene & Protection: Always use professional body wrap foil over the blanket before the client lies down and before applying any active ingredients.

6. Once the session is finished, set the temperature control unit to the OFF position.

1. Open the box carefully and do not use knives or scissors, as you might accidentally cut the blanket, making it unsafe to use.

2. Setup: Spread the blanket flat on your bed and secure it to the corners using the elastic straps. Make sure the power cable is straight and not kinked or tangled.

3. Getting started: Plug it into the wall outlet and switch it on. An indicator light will show you that the blanket is heating up.

4. Temperature: Choose the setting that feels best for you: Low, Medium, or High. We recommend starting with the lowest setting first!

5. Keep it clean: If you are using body creams or oils, always place a protective sheet or foil over the blanket to keep it clean and stain-free.

6. When you’re finished relaxing, remember to switch the unit to OFF and unplug it from the power source.

Manufacturer and distributor:
Alveola Ltd.
Hungary, 1143 Budapest Gizella street 28/a
Tel: +36 1251 2270
information [at]alveola.com