Catalogues
Contact
- Description
This 12-liter dry heat sterilizer effectively eliminates bacteria, viruses, and fungi from metal instruments. The microprocessor-based control ensures precise thermal stability, while its heavy-duty construction guarantees a long service life even under intensive professional use.
- Applications: Ideal for sterilizing metal tools and specific textiles.
- Target Industry: Specifically developed for the beauty industry (cosmetics, tattoo studios, pedicures).
- Important: Not recommended for medical use!
Product Specifications
- Type: Dry heat sterilizer (Class B)
- Control: Digital microprocessor control
- Capacity: 12 Liters
- Power: 1800 W
- Voltage: 230V ~ 50 Hz
Dimensions
- Height: 40 cm
- Width: 56 cm
- Length: 45 cm
- More informationWidth:56 cmHeight:40 cmLenght:45 cm
- Professional use
Important: Use only for beauty industry metal tools and textiles! Not suitable for medical use.
Setup and Start
- Place on a horizontal surface, at least 10 cm away from walls.
- Use distilled water only to fill the device! Fill the tank until you hear the beep (required if the green drop icon is lit).
- Place tools loosely on the trays to ensure proper airflow. Use sterilization pouches!
- Close the door firmly and turn the handle to the locked position.
- Select the program (Unwrapped/Wrapped/Cotton), then press the START button.
Operation
- Cycle: Heating, sterilization, and drying are automatic, taking approximately 20–35 minutes.
- Unloading: Open only when "ED" is displayed and the pressure gauge is at 0. Use the tray holder tool to avoid burns!
- Drainage: If the gray drop icon is lit, drain the used water through the front tube.
Maintenance
- Cleaning: Wipe the door seal and the chamber weekly with a cloth dampened with distilled water.
- Safety: In case of an error code (e.g., E1–E9) or beeping, stop the machine and check the door seal or water levels.
- How to use at home
Important: Use only for beauty industry metal tools and textiles! Not suitable for medical use.
Setup and Start
- Place on a horizontal surface, at least 10 cm away from walls.
- Use distilled water only to fill the device! Fill the tank until you hear the beep (required if the green drop icon is lit).
- Place tools loosely on the trays to ensure proper airflow. Use sterilization pouches!
- Close the door firmly and turn the handle to the locked position.
- Select the program (Unwrapped/Wrapped/Cotton), then press the START button.
Operation
- Cycle: Heating, sterilization, and drying are automatic, taking approximately 20–35 minutes.
- Unloading: Open only when "ED" is displayed and the pressure gauge is at 0. Use the tray holder tool to avoid burns!
- Drainage: If the gray drop icon is lit, drain the used water through the front tube.
Maintenance
- Cleaning: Wipe the door seal and the chamber weekly with a cloth dampened with distilled water.
- Safety: In case of an error code (e.g., E1–E9) or beeping, stop the machine and check the door seal or water levels.
- Review
- Manufacturer and distributor
Manufacturer and distributor:
Alveola Ltd.
Hungary, 1143 Budapest Gizella street 28/a
Tel: +36 1251 2270
information [at]alveola.com
