Catalogues
Contact
- Description
Restore Surgical Precision to Your Finishing Tool.
For flawless skin fades and razor-sharp contours, a sharp blade and an intact foil are non-negotiable. This genuine Shaver Detail replacement head ensures your device regains the professional efficiency and smoothness it had on day one.Key Highlights:
- Precision Single-Blade Design: Specifically engineered for detailed finishing and navigating tight areas with ease.
- Ultra-Thin Foil: Provides a skin-close shave without irritation, shielding the skin while delivering a clean finish.
- Snap-On Replacement: Designed for quick, tool-free installation to minimize downtime in the salon.
- Built to Last: High-grade alloy blades designed to maintain their edge through heavy-duty professional use.
- More information
- Professional use
- Foil Preservation:Pros know that single-blade foils are extremely thin and delicate. Never blow compressed air directly onto the foil from point-blank range; the sudden pressure can warp the mesh. Always de-dust from at least 4-6 inches away.
- Breaking in the Blade:After installing a new head, apply a single tiny drop of oil to the inner surface of the foil and let the motor run for 30 seconds. This helps the new blade and the ultra-thin foil "seat" perfectly together, preventing initial razor burn.
- Disinfection Protocol:Instead of liquid soaks, use a professional 5-in-1 spray that includes a lubricant. After disinfecting, always make sure the foil is dry before turning on the 8,000 RPM motor to prevent limescale buildup inside the micro-holes.
- Pressure Control:If you feel the shaver isn't cutting as smoothly, do not press harder! This is the number one mistake that tears the foil. If it’s not cutting, clean it thoroughly or replace it—the weight of the device and the motor's speed should do all the work.
- How to use at home
- Removal: Ensure the shaver is switched off. Grip the sides of the foil head and pull it firmly away from the body.
- Blade Replacement: Gently pull the old internal blade off the drive shaft.
- Cleaning: Before installing the new set, use the cleaning brush to remove any hair clippings and dust from the motor shaft area.
- Installation: Snap the new internal blade onto the shaft, then push the new outer foil head into place until you hear it click.
- Testing: Turn the device on for 5-10 seconds before the first use to ensure the blades are seated properly and running smoothly.
- Review
- Manufacturer and distributor
Manufacturer and distributor:
Alveola Ltd.
Hungary, 1143 Budapest Gizella street 28/a
Tel: +36 1251 2270
information [at]alveola.com
