X-Epil Roll-on Wax with Talcum for Happy Roll 50ml

Wax cartridge, enriched in talcum powder and titanium dioxide, which is suitable for every 50 ml wax heater.

Also recommended for sensitive skin.

How to use: Clean the skin from impurities, oily residues and sweat. Recommended to present a peeling step with a gentle scrub to remove the dead skin cells. Apply talcum powder to the cleansed skin to increase the adheresion between the wax and hair. Heat the wax with X-Epil wax heater or in hot water (85°C), or even in a microwave (800W) for 2 minutes (full cartridge). Before application always check the wax temperature.

TIP! For greater effectiveness hair should be at least 2-3mm long.

Apply the heated wax onto the dry, oil-less skin in the same direction of hair growth. 

Smooth and press strip, after hold skin taut and remove strip in the opposite direction of hair growth with a single swift, decisive motion. If there is any wax residues, use X-Epil After Wax Cleansing Oily wipes or X-Epil After-Wax Cleansing Oil to remove them. After waxing to reduce the skin redness, use X-Epil After Wax Calming Gel.

Warning:

• Before using for the first time, test the product on a small area of skin.
• Proceed with waxing only if no irritation is observed within 24 hours.
• Never use wax on irritated, damaged, or injured skin or immediately after sunbathing.
• Do not expose skin to direct sunlight or use perfumes for 24 hours after waxing.
• After waxing, the skin may become red and more sensitive. Although this is normal, if sensitivity or bruising occurs and does not disappear within 24 hours, consult a physician.
• Keep product away from eyes. Do not swallow.
• Store unused wax in a cool location, as the product is sensitive to heat.
• Keep locked and out of reach of children!